Klein Tools’ conduit benders with Patent Pending Angle Setter technology allow for quick, accurate bends. When performing repeated bends the Angle Setter will save time on the job. Works for floor or air bends.
Warnings
Always wear approved eye protection.
Use a safe work position to avoid loss of balance.
Features
Also available in 3/4-Inch (Cat. No. 51612) and 1-Inch (Cat. No. 51613)
Compatible with Klein Tools’ 1/2-Inch Aluminum Conduit Bender (Cat. No. 51606)
Made in the USA Angle Setters create a hard stop for fast, accurate bending
Conduit insets into bender head, bend as usual until the conduit makes contact with the setter
Movable for four different bend angles: 10-Degree, 22.5-Degree, 30-Degree, 45-Degree (adjusted for conduit spring back)
Klein’s unique Angle Setter technology for quick, accurate repeated bends saving time on the job (Patent Pending)
Align the angle lines on the Angle Setter with the bender, ensure the alignment tabs are fully seated in the bender track notches, press the Angle Setter firmly into place
Patent Pending Technology
Specifications
Weight: 0.0800 lbs
Type: Angle Setter
Marking: 10, 22.5, 30, 45
For Use With: Conduit Benders Cat. Nos. 51603, 51606; Conduit Bender Head Cat. No. 51608
Width: 3.7000 in
Thinwall/EMT: 1/2″ (1.3 cm)
Conduit Size: 1/2″
Overall Height: 2.3 cm (0.9 Inch)
Material: Delrin Plastic
Height: 1.3700 in
Overall Length: 1.8 Inch (4.6 cm)
Depth: 7.1000 in
Application: Angle Setter for Klein Conduit Benders
Overall Width: 0.8 Inch (2 cm)
Instructions
ConduitBender_anglesetter_manualmkt200815_web.pdf
Downloads
Spec SheetVideo Download
Only logged in customers who have purchased this product may leave a review.
-20%
