Klein Tools’ conduit benders with Patent Pending Angle Setter technology allow for quick, accurate bends. When performing repeated bends the Angle Setter will save time on the job. Works for floor or air bends.
Features
Klein’s unique Angle Setter technology for quick, accurate repeated bends saving time on the job (Patent Pending)
Also available in 1/2-Inch (Cat. No. 51611) and 1-Inch (Cat. No. 51613)
Align the angle lines on the Angle Setter with the bender, ensure the alignment tabs are fully seated in the bender track notches, press the Angle Setter firmly into place
Compatible with Klein Tools’ 3/4-Inch Aluminum Conduit Bender (Cat. No. 51607)
Patent Pending Technology
Conduit insets into bender head, bend as usual until the conduit makes contact with the setter
Movable for four different bend angles: 10-Degree, 22.5-Degree, 30-Degree, 45-Degree (adjusted for conduit spring back)
Made in the USA Angle Setters create a hard stop for fast, accurate bending
Warnings
Use a safe work position to avoid loss of balance.
Always wear approved eye protection.
Specifications
Weight: 0.0800 lbs
For Use With: Conduit Benders Cat. Nos. 51604, 51607; Conduit Bender Head Cat. No. 51609
Type: Angle Setter
Application: Angle Setter for Klein Conduit Benders
Rigid/IMC: 1/2″ (1.3 cm)
Marking: 10, 22.5, 30, 45
Material: Delrin Plastic
Thinwall/EMT: 3/4″ (1.9 cm)
Depth: 7.1400 in
Height: 1.3700 in
Overall Height: 2.5 cm (1 Inch)
Overall Width: 1 Inch (2.5 cm)
Conduit Size: 3/4″
Overall Length: 2.4 Inch (6.1 cm)
Width: 3.7100 in
Instructions
ConduitBender_anglesetter_manualmkt200815_web.pdf
Downloads
Spec SheetVideo Download
Only logged in customers who have purchased this product may leave a review.
-20%
