Remote high-pressure installations oilfield locations, field hydraulic test stations, and off-grid service points where 5,000 PSI capable hose needs to reach across 325 feet from a single fixed or vehicle-mounted reel with no power source available need a reel that handles the pressure, covers the distance, and retracts entirely under operator control. The Coxreels HP1125-4-325 delivers all three on the HP1125 Series high-pressure frame: a solid steel direct hand crank (a single-ratio mechanical crank where handle rotation transfers directly to drum rotation with no gearing simple, durable, and independent of any external power source) on the maximum-capacity HP1125 drum, handling 325 feet of 1/2-inch ID hose at up to 5,000 PSI working pressure. The electroless nickel plated steel 90 NPT swivel hardened for 5,000 PSI service over the brass swivel on standard 1125 Series models pairs with AFLAS seals for the chemical and heat resistance that high-pressure hydraulic, petroleum, and chemical service demands. One practical consideration for this configuration: at 325 feet of hose, direct-crank retraction without gearing requires sustained operator effort. For installations where retraction frequency is low and no power source is available, the direct crank provides reliable, self-contained retraction. For installations where retraction occurs frequently or operator fatigue is a concern at this drum size, the HP1125-4-325-C (bevel geared crank) reduces the effort required per retraction. The all-welded 12-gauge steel A-frame, CNC-spun ribbed discs, permanently lubricated pillow block bearings, and long-handled locking pin complete the construction for the field environments this reel operates in.*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.Type: Hand Crank Hose Reel | Series: HP1125 | Crank Type: Solid Steel Direct Hand Crank | Hose I.D. (in.): 1/2 | Hose O.D. (in.): 7/8 | Hose Length (ft.): 325 | Hose Included: No | Max PSI: 5,000 | Max Temp (F): 250 | Swivel: Electroless Nickel Plated Steel 90 NPT | Swivel Seals: AFLASFeatures:Solid steel direct hand crank with smooth round handle single-ratio mechanical retraction with no gearing, no external power source required; completely self-contained operation in any locationLong-handled locking pin locks and secures the drum from rotation during storage, transport, and fixed-extension use including mobile applications over rough terrainElectroless nickel plated steel 90 full-flow NPT swivel inlet hardened swivel construction rated for 5,000 PSI service; greater pressure capability and corrosion resistance than the brass swivel on standard 1125 Series modelsAFLAS swivel seals fluoroelastomer compound with superior chemical and heat resistance over Nitrile seals; rated to 250F and suited to hydraulic fluid, petroleum, chemical, and high-pressure service environments325-foot maximum capacity the longest single-drum reach in the HP1125 Series for 1/2-inch ID hose, covering remote high-pressure service locations and extended field installations from a single self-contained reel stationExclusive low-profile outlet riser and open drum slot design provides a non-crimping, flat smooth hose wrap across all 325 feet of drum capacityHeavy-duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection, and operator safetySturdy one-piece, all CNC robotically welded 12-gauge steel A-frame base not bolted for superior reel structure; mounting pattern in base for wall, ceiling, floor, or vehicle-body installationPermanently lubricated, self-aligning pillow block bearings for trouble-free, smooth drum rotation over extended service lifeAdjustable tension brake prevents free-wheeling during hose deployment; long-lasting chip-resistant, rust-inhibiting CPC powder coat finish; 2-year manufacturer’s limited warrantyMade in USA: 2 Year WarrantyApplications:Remote oilfield & well service locationsfield installations for high-pressure chemical injection, well control fluid lines, and 5,000 PSI service at sites where no electrical or air supply is available and 325 feet of reach from a single reel point reduces equipment repositioningMobile high-pressure service trailers service trailers and portable units carrying 5,000 PSI capable hose to remote job sites where power infrastructure is absent and 325 feet of reach provides maximum operational flexibility across a wide range of service distancesField hydraulic test stations remote pressure testing of hydraulic components and assemblies at up to 5,000 PSI where the test station is off-grid and 325 feet of reach covers the full test area from a single reel pointHigh-pressure water jetting remote operationsfield water jetting and surface preparation above 3,000 PSI at locations without available power, where 325 feet of hose capacity and self-contained manual retraction cover maximum-distance jetting runsAgricultural & rural high-pressure serviceremote farm and rural locations handling high-pressure fluid lines at up to 5,000 PSI where no power source is available at the reel mounting point and low retraction frequency makes direct-crank operation practicalFAQs:Q: How much effort does it take to hand-crank 325 feet of hose back onto this drum?A: Significantly more than on shorter-capacity drums. The direct crank (no gearing) transfers operator effort to the drum at a one-to-one ratio each handle rotation equals one drum rotation, with no mechanical advantage to reduce the force required. On a fully loaded 325-foot drum of 1/2-inch hose, retraction requires sustained effort across many handle rotations. For installations where retraction occurs frequently, operator fatigue will accumulate. The HP1125-4-325-C (bevel geared crank) uses angled gears to reduce the force required per rotation and is the better choice where retraction frequency is more than a few times per shift. The direct crank on this model suits low-cycle applications infrequent retraction in locations where no power source is available and maximum simplicity is the priority.Q: What is the difference between the HP1125-4-325 (direct crank) and the HP1125-4-325-C (bevel geared crank)?A: Both are fully manual with no external power source, and both handle 325 feet at 5,000 PSI on the HP1125 frame. The direct crank model uses a solid steel direct hand crank maximum simplicity, no gear mechanism to wear or service, but no mechanical advantage on the drum. The -C model uses a bevel geared crank angled gears reduce the force required per handle rotation, making retraction of the maximum-capacity drum less physically demanding. For very low-frequency use where simplicity and minimum parts count is the priority, the direct crank is appropriate; for any installation where the reel retracts regularly, the bevel geared -C is the more practical choice at this drum size.Q: What is the difference between the HP1125-4-325 and the standard 1125-4-325?A: Both use a solid steel direct hand crank on the same basic chassis. The HP1125-4-325 is rated to 5,000 PSI with an electroless nickel plated steel swivel and AFLAS seals. The standard 1125-4-325 is rated to 3,000 PSI with a machined brass swivel and Nitrile seals. For applications at or below 3,000 PSI, the standard 1125-4-325 is the more economical choice; for applications requiring up to 5,000 PSI, the HP1125-4-325 is required.Q: What type of hose should be used with this reel at 5,000 PSI?A: Coxreels recommends SAE 100R16 wire braid hose for HP1125 Series reels a two-wire braid construction rated for hydraulic and high-pressure oil service, suitable for the 5,000 PSI working pressure and 250F maximum temperature of this reel. Select hose assemblies with fittings rated and crimped for the working pressure, and verify hose compound compatibility with your specific fluid. Never exceed the reel’s maximum OD specification for 1/2-inch ID hose (7/8-inch OD) when selecting hose, as oversized OD will not wind correctly on the drum.Q: Does the reel come with hose included?A: No the HP1125-4-325 ships less hose. The drum accepts 1/2″ ID / 7/8″ OD hose up to 325 feet. At 5,000 PSI, use hose assemblies with fittings rated and crimped for high-pressure service. At 325 feet, loaded hose weight also adds substantially to the total reel weight and to the cranking effort factor both into the installation and operation planning.body{margin:0;padding:0;overflow-x:hidden;}.spec-accordion{width:100%;max-width:1100px;margin:1em auto;font-family:Verdana,Arial,sans-serif;}.spec-accordion-toggle{width:100%;display:grid;grid-template-columns:32px 1fr 32px;align-items:center;gap:8px;text-align:center;cursor:pointer;background:#444;color:#fff;border:0;padding:12px 16px;font-size:16px;font-weight:700;text-transform:uppercase;}.spec-accordion-title{grid-column:2;text-align:center;text-transform:uppercase;}.spec-accordion-icon{grid-column:3;text-align:right;font-size:20px;font-weight:700;}.spec-accordion-panel{border:1px solid #cfcfcf;border-top:0;padding:0;background:#fff;display:block;}.spec-table-wrapper{width:100%;max-width:1100px;margin:0 auto;overflow-x:auto;}.spec-table{width:100%;border-collapse:collapse;font-family:Verdana,Arial,sans-serif;font-size:12px;color:#111;}.spec-table th,.spec-table td{border:1px solid #d3d3d3;padding:6px 8px;text-align:center;vertical-align:middle;}.spec-table thead th{background:#444;color:#fff;text-transform:uppercase;font-weight:700;}.spec-table thead tr:nth-child(2) th{background:#e9e9e9;color:#111;}.spec-table tbody tr:nth-child(even){background:#f7f7f7;}.spec-table a{color:#0066cc;text-decoration:none;font-weight:700;}.spec-table a:hover{color:#004f99;text-decoration:underline;}@media(max-width:640px){ .spec-table thead{display:none;} .spec-table tbody td{display:flex;justify-content:space-between;align-items:center;border-bottom:1px solid #e2e2e2;padding:8px;} .spec-table td::before{content:attr(data-label);font-weight:700;text-transform:uppercase;flex:0 0 45%;text-align:left;color:#444;}} AVAILABLE VARIATIONS AND SPECIFICATIONS LESS HOSESKUSTANDARD CAPOPTIONAL CAP.Reducer requiredINLET SWIVEL & OUTLET RISERPSIHP SKUHP PSIAPRX. LBS.SIZE INDEXI.D.O.D.FT.I.D.O.D.FT.1125-4-3251/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-32550004831125-4-325-A1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-A50004831125-4-325-AB1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-AB50004831125-4-325-C1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-C50004831125-4-325-E1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-E50004831125-4-325-ED1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-ED50004831125-4-325-EF1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-EF50004831125-4-325-EB1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-EB50004831125-4-325-EA1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-EA50004831125-4-325-H1/2″7/8″3253/8″3/4″4501/2″ F NPT3000HP1125-4-325-H5000483const accordionToggle = document.querySelector(‘.spec-accordion-toggle’);const accordionPanel = document.querySelector(‘.spec-accordion-panel’);const icon = accordionToggle.querySelector(‘.spec-accordion-icon’);accordionToggle.addEventListener(‘click’, () => { const expanded = accordionToggle.getAttribute(‘aria-expanded’) === ‘true’; accordionToggle.setAttribute(‘aria-expanded’, !expanded); accordionPanel.style.display = expanded ? ‘none’ : ‘block’; icon.textContent = expanded ? ‘+’ : ‘?’;});Looking for more information about theCoxreelsRewindReel?Click hereto view theCatalog.For help choosing the correctCoxreelsRewindReels, please call(800) 608-5210or [email protected]
-91%
