This Chicago Grip is specifically made for ACSR, AAC and copper cabling with larger diameters. These non-returnable grips are special order only. When ordering, please specify exact outside cable diameter, circular mills with strand combination, or the manufacturer’s code. Please allow 30 days for delivery.
Warnings
Do not exceed rated capacity.
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Grips are to be used for temporary installation, not for permanent anchorage.
Always match proper size and type of grip to application.
Features
Round jaws are provide maximum contact with the cable minimizing deformation
Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer’s code.
These grips are special order only, please allow 30 days for delivery, not returnable — Removable floating jaw held in place by a bolt swaged into the lever arm of the grip, secured by a nut and cotter pin — Jaw must be removed to insert cable
Jaw must be removed to insert cable
Removable jaw allows for installation of cable
Removable floating jaw held in place by a bolt swaged into the lever arm of the grip, secured by a nut and cotter pin
These Made in USA grips are special order only. Please allow 30 days for delivery. These are not returnable.
-20%
